FLUKE 376FC True-RMS Clamp Meter Repair

A clamp meter differs from a standard multimeter in that it has a built in current clamp for measuring higher values of current and without having to break the circuit. They are very useful in testing appliance current draw, battery usage in RV and automotive use, as well as current in solar installations.

The 376 FC clamp meter uses an integrated low-pass filter for accurate measurements of non-linear signals, such as adjustable speed drives, electronic ballasts and other non-linear loads. The clamp also uses proprietary inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it.

Measure:

• Voltage to 1000 V AC or DC
• Resistance to 60 kΩ with continuity detection
• Min, max, average, and inrush recording to capture variations automatically
• 500 mV DC measurement range to interface with other accessories
• 1000 μF capacitance measurement
• Work safely and conveniently
• The 376 FC clamp carries a CAT III 1000 V, CAT IV 600 V safety rating, designed to offer you the highest possible protection in a test tool.

Note: This is a great meter for general testing of HVAC, Automotive, Recreational Vehicles, and general home appliances . It is a rugged and simple to use meter. Due to this meter only going to 60K Ohm for resistance measurement, this is not the best option for a bench meter for someone who is getting heavily into electronics where measurement of higher resistances than 60K Ohm will be needed.