Введение
In this guide, you will learn the placement of the screws holding the lid together along with a description of how to properly open up the device and remove the power/volume buttons.
Выберете то, что вам нужно
-
-
To begin, locate the two 4.9mm Phillips #00 screws at the top corners of the case and remove them.
Спросите у FixBot
-
-
-
-
Squeeze the plastic opening tool in between the seam where the screen joins the plastic case.
-
Begin separating the bottom of the case from the screen by carefully going around the whole edge of the case and slowly prying it apart.
-
-
Инструмент, используемый на этом этапе:Tweezers$4.99
-
Carefully place the bottom lid next to the screen case. The power/speaker buttons should be visible at the corner of the lid. Remove the buttons with the tweezers.
-
To reassemble your device, follow these instructions in reverse order.
Команда
USF Tampa, Team 9-1, Leahy Winter 2015 Участник USF Tampa, Team 9-1, Leahy Winter 2015
USFT-LEAHY-W15S9G1
3 членов
Автор 9 руководств
