Перейти к основному содержанию

Astak Mole Microphone Replacement

Выберете то, что вам нужно

  1. Astak Mole Microphone  Replacement, Lower Case: шаг 1, изображение 1 из 1
    • Remove the four bottom tabs in order to access the bottom screws.

  2. Astak Mole Microphone  Replacement: шаг 2, изображение 1 из 1
    • Remove all four 14 mm Phillips #1 screws.

  3. Astak Mole Microphone  Replacement: шаг 3, изображение 1 из 1
    • Remove the SD card.

  4. Astak Mole Microphone  Replacement: шаг 4, изображение 1 из 1
    • Pry up the motherboard on the four points using a spudger.

    • The regular black nylon spudger should be used whenever possible, especially around sensitive internal components.

  5. Astak Mole Microphone  Replacement: шаг 5, изображение 1 из 1
    • Gently pull back the motherboard to expose many of the component's wired connections.

  6. Astak Mole Microphone  Replacement, Microphone: шаг 6, изображение 1 из 1
    • Remove microphone from its holder on the bottom section of the casing.

  7. Astak Mole Microphone  Replacement: шаг 7, изображение 1 из 1
    • Access microphone and assess damage.

  8. Astak Mole Microphone  Replacement: шаг 8, изображение 1 из 1
    • Remove microphone input with metal spudger. Be sure to sever electrical adhesive in order to separate input and output.

    • It is advised to re-apply adhesive to the cable once the new microphone cable is replaced.

    • The regular black nylon spudger should be used whenever possible, especially around sensitive internal components.

Заключение

To reassemble your device, follow these instructions in reverse order.

Joseph Bello

Участник с: 09/20/16

228 Репутация

Автор 2 руководств

Команда

USF Tampa, Team 2-2, Blackwell Fall 2016 Участник USF Tampa, Team 2-2, Blackwell Fall 2016

USFT-BLACKWELL-F16S2G2

4 членов

Автор 12 руководств

0 Комментариев

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 3

За последние 30 дней: 7

За всё время: 190