Введение
Asus ZenWatch 2 users can set the watch to vibration mode if they want to receive notifications without an audible alert. The main component for this setting is the vibration motor housed within the casing of the watch. If the Asus ZenWatch 2 stops vibrating, this guide shows users how to replace it.
Выберете то, что вам нужно
-
-
-
Remove the watch strap by sliding the knob inward to detach from the face plate.
Спросите у FixBot
-
-
-
-
Open the watch by removing the four 3.5mm screws using the T5 screwdriver.
-
-
-
Place the spudger under the vibration motor and lift up to remove it from the watch.
-
-
To reassemble your device, follow these instructions in reverse order.
Отменить: Я не выполнил это руководство.
Еще один человек закончил это руководство.
Команда
USF Tampa, Team S1-G1, Leahy Spring 2017 Участник USF Tampa, Team S1-G1, Leahy Spring 2017
USFT-LEAHY-S17S1G1
3 членов
Автор 10 руководств
