Введение
Use this guide to remove the back cover of the AZ 727. This may take a little time, so do not throw the device down in disgust.
Выберете то, что вам нужно
-
-
Remove two 3mm screws with the Phillips screwdriver.
Спросите у FixBot
-
-
-
-
Insert a plastic opening tool in the center then gently work towards the center.
-
Work the opening tool around the edges to separate the back cover from the rest of the device.
-
Заключение
To reassemble your device, follow these instructions in reverse order.
Команда
