Введение

This guide shows the steps to replace the parts in the base.

Выберете то, что вам нужно

Remove the four Phillips #0 screws (9.4mm) located at the bottom of the phone on the back side of the base.

Use the spudger to separate the bottom from the top.
There are two clips, located top and bottom, that you have to compress with the spudger.

Заключение

To reassemble your device, follow these instructions in reverse order.

2 человек успешно провели ремонт по этому руководству.

Участник с: 02/08/16

442 Репутация

Автор 3 руководств

IUPUI-BAECHLE-S16S1G4

4 членов

Автор 16 руководств