Введение

Use this guide to replace the keyboard cover of your BlackBerry Curve 8520.

Запчасти

Никакие детали не требуются.

Insert a plastic opening tool into the small notch on the rear cover of the phone. Pry the rear cover up from the phone.
  • Insert a plastic opening tool into the small notch on the rear cover of the phone.

  • Pry the rear cover up from the phone.

Добавить комментарий

Locate the slit between the top of the battery and the casing. Gently apply pressure on the top of the battery to trigger the spring release.
  • Locate the slit between the top of the battery and the casing.

  • Gently apply pressure on the top of the battery to trigger the spring release.

Добавить комментарий

Remove the two Torx T6 screws to the left and right of the battery. Remove the two Torx T6 screws to the left and right of the battery.
  • Remove the two Torx T6 screws to the left and right of the battery.

Добавить комментарий

Using hairdryer or heat gun, warm the front panel to soften the adhesive beneath. Starting from one side, use a plastic opening tool to pry up the screen cover.
  • Using hairdryer or heat gun, warm the front panel to soften the adhesive beneath.

  • Starting from one side, use a plastic opening tool to pry up the screen cover.

    • Work carefully to avoid bending the screen cover.

  • Once one side is loose, gently peel up the entire cover.

Добавить комментарий

Insert the plastic opening tool in the seam along the side of the device. Slide the tool along the length of the seam, applying moderate force with the plastic opening tool. Carefully remove the faceplate.
  • Insert the plastic opening tool in the seam along the side of the device.

  • Slide the tool along the length of the seam, applying moderate force with the plastic opening tool.

  • Carefully remove the faceplate.

Добавить комментарий

Remove four T6 Torx screws from the front of the phone. Using tweezers, remove the keyboard buttons from the phone. Using tweezers, remove the keyboard buttons from the phone.
  • Remove four T6 Torx screws from the front of the phone.

  • Using tweezers, remove the keyboard buttons from the phone.

bb is nt a freely phone is a phone bcz of ringing some how it is nt

tankiso - Ответить

Заключение

To reassemble your device, follow these instructions in reverse order.

27 участников успешно повторили данное руководство.

Matt

Участник с: 07.04.2011

1 708 Репутация

Автор 5 руководств

Команда

Cal Poly, Team 9-62, Walters Spring 2011 Member of Cal Poly, Team 9-62, Walters Spring 2011

CPSU-WALTERS-S11S9G62

5 членов

Автор 5 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 0

За 7 дней: 7

За 30 дней: 24

За всё время: 34,549