Перейти к основному содержанию

Bottom Cover

Выберете то, что вам нужно

  1. Bottom Cover, Battery: шаг 1, изображение 1 из 1
    • Before proceeding, power down your Laptop and remove the power cable.

    • Close the display and lay it on a flat surface, top-side down.

  2. Bottom Cover: шаг 2, изображение 1 из 1
    • Unlock the battery by sliding the battery lock to the unlock part.

  3. Bottom Cover: шаг 3, изображение 1 из 1
    • Slide the middle lock to the right and the battery will pop up.

  4. Bottom Cover: шаг 4, изображение 1 из 1
    • If you want to replace the battery and nothing else then now is the time to do so.

    • Once the battery hatch is unlocked you can now safely remove the battery.

  5. Bottom Cover, Bottom Cover: шаг 5, изображение 1 из 1
    Инструмент, используемый на этом этапе:
    iFixit Precision 4 mm Screwdriver Bit
    $2.99
    Купить
    • Use a Philips J1 driver to remove eight screws securing the bottom case.

    • Remove all of the 8 screws and the bottom panel should pop off.

  6. Bottom Cover: шаг 6, изображение 1 из 1
    • After that you are in and now can change most of the components, which we also have tutorials for.

Заключение

To reassemble your device, follow these instructions in reverse order.

Regome

Участник с: 01/20/23

767 Репутация

Автор 7 руководств

0 Комментариев

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 5

За всё время: 72