Перейти к основному содержанию
Присоединяйся к сообществу ремонтников - Создай аккаунт

Canon EOS 30 Strap Loops Replacement

Выберете то, что вам нужно

  1. Canon EOS 30 Strap Loops Replacement, Top Panel: шаг 1, изображение 1 из 1
    • Slide the outer eyepiece upward to remove it.

  2. Canon EOS 30 Strap Loops Replacement: шаг 2, изображение 1 из 1
    • Remove the two 4.75 mm black screws located on the top of the camera.

  3. Canon EOS 30 Strap Loops Replacement: шаг 3, изображение 1 из 1
    • Remove the four 4.3 mm black screws near the bottom corners of the eyepiece at the back of the camera.

  4. Canon EOS 30 Strap Loops Replacement: шаг 4, изображение 1 из 2 Canon EOS 30 Strap Loops Replacement: шаг 4, изображение 2 из 2
    • Slowly separate the top panel from the camera by pushing it upward.

    • Separating the top panel too far or quickly can damage the ribbon cable and connecting wires that are still attached to the top panel of the camera.

  5. Canon EOS 30 Strap Loops Replacement, Strap Loops: шаг 5, изображение 1 из 2 Canon EOS 30 Strap Loops Replacement, Strap Loops: шаг 5, изображение 2 из 2
    • Remove two 5.9 mm silver screws on top of camera to detach left strap loop (opposite grip).

  6. Canon EOS 30 Strap Loops Replacement: шаг 6, изображение 1 из 2 Canon EOS 30 Strap Loops Replacement: шаг 6, изображение 2 из 2
    • Remove one 8.5 mm silver screw (front) and one 5.45 mm silver screw (back) to remove strap loop near LCD screen.

Заключение

To reassemble your device, follow these instructions in reverse order.

2 человек успешно провели ремонт по этому руководству.

Alexander Gonzalez

Участник с: 04/17/11

15 Репутация

1 руководство автора

Команда

Cal Poly, Team 8-8, Regan Spring 2011 Участник Cal Poly, Team 8-8, Regan Spring 2011

CPSU-REGAN-S11S8G8

5 членов

Автор 22 руководств

0 Комментарии к руководству

Добавить комментарий

Статистика просмотров:

За последние 24 часов: 2

За последние 7 дней: 17

За последние 30 дней: 46

За всё время: 2,915