Перейти к основному содержанию

Введение

Follow this guide to replace the battery for the Canon EOS 40D. Make sure your battery is fully charged and it's the correct model if you have purchased a new battery. The battery should be a BP-511A Rechargeable Li-ion Battery, BP-514 Rechargeable Li-ion Battery, BP-511 Rechargeable Li-ion Battery, or BP-512 Rechargeable Li-ion Battery. With a BG-E2N battery grip or a BG-E2 battery grip, size-AA batteries can also be used.

Инструменты

Инструменты не указаны.

Запчасти

  1. Locate the battery compartment cover on the bottom of the camera below the shutter button.
    • Locate the battery compartment cover on the bottom of the camera below the shutter button.

  2. Find the marked arrow on the battery compartment cover labeled "BATT. OPEN". Slide the lever following the arrow's direction and lift at the same time to release the latch.
    • Find the marked arrow on the battery compartment cover labeled "BATT. OPEN". Slide the lever following the arrow's direction and lift at the same time to release the latch.

  3. Release the lever and allow the battery compartment cover to completely open.
    • Release the lever and allow the battery compartment cover to completely open.

    • Remove the battery.

Заключение

To reassemble your device, follow these instructions in reverse order.

10 участников успешно повторили данное руководство.

Doug Kruse

Участник с: 03.09.2015

715 Репутация

Автор 3 руководств

Команда

USF Tampa, Team 12-3, Blackwell Fall 2015 Участник USF Tampa, Team 12-3, Blackwell Fall 2015

USFT-BLACKWELL-F15S12G3

4 членов

Автор 15 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 6

За последние 30 дней: 24

За всё время: 3,291