Перейти к основному содержанию

Введение

This guide shows how to remove the back case of the Casio Exilim EX Z55 camera to replace a damaged back case or access the inner parts of the camera.

Запчасти

Детали не указаны.

  1. Remove eight 1.8 mm screws from the left and right sides of the camera using a Phillips #00 screwdriver Remove eight 1.8 mm screws from the left and right sides of the camera using a Phillips #00 screwdriver Remove eight 1.8 mm screws from the left and right sides of the camera using a Phillips #00 screwdriver
    • Remove eight 1.8 mm screws from the left and right sides of the camera using a Phillips #00 screwdriver

  2. Remove the four 3.7 mm screws from the bottom of the camera using a Phillips #00 screwdriver.
    • Remove the four 3.7 mm screws from the bottom of the camera using a Phillips #00 screwdriver.

  3. Separate the front case from the body of the camera.
    • Separate the front case from the body of the camera.

  4. Separate the back case from the body of the camera.
    • Separate the back case from the body of the camera.

Заключение

To reassemble your device, follow these instructions in reverse order.

2 участников успешно повторили данное руководство.

Laura

Участник с: 19.04.2012

31 Репутация

Автор 2 руководств

Команда

Cal Poly, Team 9-45, Regan Spring 2012 Участник Cal Poly, Team 9-45, Regan Spring 2012

CPSU-REGAN-S12S9G45

7 членов

Автор 12 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 2

За всё время: 521