Перейти к основному содержанию

Fix Your Stuff

Right to Repair

Parts & Tools

Введение

This guide shows how to remove the front case from the rest of the camera. You may have to do this to replace a damaged front cover or to access the inner parts of the camera.

Запчасти

Детали не указаны.

  1. Locate 12 screws. Four on the left, four on the right, and four on the bottom. Locate 12 screws. Four on the left, four on the right, and four on the bottom. Locate 12 screws. Four on the left, four on the right, and four on the bottom.
    • Locate 12 screws. Four on the left, four on the right, and four on the bottom.

  2. Using the #00 Phillips screwdriver, remove the four 3.66mm screws from the bottom outer case, and the eight 1.75mm screw from the sides of the case.
    • Using the #00 Phillips screwdriver, remove the four 3.66mm screws from the bottom outer case, and the eight 1.75mm screw from the sides of the case.

  3. Separate the front case from the body of the camera.
    • Separate the front case from the body of the camera.

Заключение

To reassemble your device, follow these instructions in reverse order.

Patrick Stalwick

Участник с: 18.04.2012

112 Репутация

Автор 2 руководств

Команда

Cal Poly, Team 9-45, Regan Spring 2012 Участник Cal Poly, Team 9-45, Regan Spring 2012

CPSU-REGAN-S12S9G45

7 членов

Автор 6 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 1

За последние 30 дней: 5

За всё время: 315