Введение
The Video Interface Controller (VIC) is is the graphics chip for the C64.
Выберете то, что вам нужно
-
Шаг 1 Removing screws
Careful: steps 1-2 are sourced from a guide that's marked as in-progress.
-
1. Remove three 6.75mm ph2 screw heads from the casing
-
-
-
-
1. Detach the multi-colored wire bundles that's connected to the motherboard
-
-
-
2. Without using any tools prop up the metal VIC plate with both hands to expose the VIC chip.
-
-
-
3. Use a Phillips screwdriver to pry up the VIC chip. Then, use your hands and with small pressure pull it away to remove it from the motherboard.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Отменить: Я не выполнил это руководство.
2 участников успешно повторили данное руководство.
Команда
USF Tampa, Team 13-6, Staggers Fall 2014 Участник USF Tampa, Team 13-6, Staggers Fall 2014
USFT-STAGGERS-F14S13G6
4 членов
Автор 15 руководств
