Перейти к основному содержанию

Contour Roam2 Rotating Lens Replacement

Выберете то, что вам нужно

  1. Contour Roam2 Rotating Lens Replacement, Rotating Lens: шаг 1, изображение 1 из 1
    • Using the phillips head screwdriver (PH000) locate and remove the 4.45mm (.175in) screw by the 180 degree graphic on the metal ring.

    • The screws in the camera are very small and can strip very easily. Apply consistent pressure when removing screws.

  2. Contour Roam2 Rotating Lens Replacement: шаг 2, изображение 1 из 2 Contour Roam2 Rotating Lens Replacement: шаг 2, изображение 2 из 2
    • Rotate the metal ring counterclockwise until completely removed.

  3. Contour Roam2 Rotating Lens Replacement: шаг 3, изображение 1 из 1
    • Use a spudger to pry up the black rubber ring around the lens cover.

    • The black rubber ring is vey thin and can easily tear. Use caution when removing.

  4. Contour Roam2 Rotating Lens Replacement: шаг 4, изображение 1 из 1
    • Remove and replace the lens cover.

Заключение

To reassemble your device, follow these instructions in reverse order.

Еще один человек закончил это руководство.

Matthew Kofsky

Участник с: 03/11/15

548 Репутация

Автор 3 руководств

Команда

Colorado Springs, Team 4-5, Panko Spring 2015 Участник Colorado Springs, Team 4-5, Panko Spring 2015

UCCS-PANKO-S15S4G5

3 членов

Автор 10 руководств

0 Комментариев

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 2

За всё время: 820