Перейти к основному содержанию

Dell Studio 1555 Display Replacement

Выберете то, что вам нужно

  1. Dell Studio 1555 Display Replacement, Battery: шаг 1, изображение 1 из 1
    • Turn off and unplug the laptop.

    • Failure to properly turn off device before handling the battery could result in electrical shock.

    • Flip the laptop so the underside is facing up with the battery closest to you.

  2. Dell Studio 1555 Display Replacement: шаг 2, изображение 1 из 3 Dell Studio 1555 Display Replacement: шаг 2, изображение 2 из 3 Dell Studio 1555 Display Replacement: шаг 2, изображение 3 из 3
    • Slide the locking switch to the left to release the battery.

  3. Dell Studio 1555 Display Replacement: шаг 3, изображение 1 из 1
    • Gently pull the battery away from the device.

  4. Dell Studio 1555 Display Replacement, Display: шаг 4, изображение 1 из 2 Dell Studio 1555 Display Replacement, Display: шаг 4, изображение 2 из 2
    • Insert a plastic opening tool between the bezel and the display cover.

    • Wiggle it to the release the latches.

    • Separate the bezel from the cover.

  5. Dell Studio 1555 Display Replacement: шаг 5, изображение 1 из 2 Dell Studio 1555 Display Replacement: шаг 5, изображение 2 из 2
    • Remove the four 3 mm screws securing the LCD using the #1 Phillips screwdriver.

  6. Dell Studio 1555 Display Replacement: шаг 6, изображение 1 из 1
    • Separate the LCD assembly from the display cover so you will be able to access the webcam cable.

    • Unplug the camera cable.

  7. Dell Studio 1555 Display Replacement: шаг 7, изображение 1 из 2 Dell Studio 1555 Display Replacement: шаг 7, изображение 2 из 2
    • Place the LCD face down on the top cover.

    • Remove the sticky tape securing the video cable connector.

    • Unplug the video cable from the screen.

  8. Dell Studio 1555 Display Replacement: шаг 8, изображение 1 из 3 Dell Studio 1555 Display Replacement: шаг 8, изображение 2 из 3 Dell Studio 1555 Display Replacement: шаг 8, изображение 3 из 3
    • Remove the LCD from the laptop.

    • Remove the four 3mm screws holding the mounting brackets using the #1 Phillips screwdriver. Two on each side.

    • You will have to transfer the mounting brackets to the new screen.

Заключение

To reassemble your device, follow these instructions in reverse order.

3 участников успешно повторили данное руководство.

Josh Boone

Участник с: 10/10/16

586 Репутация

Автор 4 руководств

Команда

Sam Houston State, Team 12-3, Blackburne Fall 2016 Участник Sam Houston State, Team 12-3, Blackburne Fall 2016

SHSU-BLACKBURNE-F16S12G3

3 членов

Автор 6 руководств

0 Комментариев

Добавить комментарий

Просмотр статистики:

За последние 24часов: 2

За последние 7 дней: 4

За последние 30 дней: 11

За всё время: 1,563