Перейти к основному содержанию

Disassembling Optoma HD20 Cover

Выберете то, что вам нужно

  1. Disassembling Optoma HD20 Cover, Disassembling Optoma HD20 Cover: шаг 1, изображение 1 из 2 Disassembling Optoma HD20 Cover, Disassembling Optoma HD20 Cover: шаг 1, изображение 2 из 2
    • Twist the focal cap clockwise until it is fully extended.

    • Remove the focal cap by pulling it straight out.

  2. Disassembling Optoma HD20 Cover: шаг 2, изображение 1 из 1
    • Use a Phillips #1 screwdriver to remove the three 7.5mm screws on the bottom of the device.

  3. Disassembling Optoma HD20 Cover: шаг 3, изображение 1 из 1
    • Use a plastic opening tool to gently pry the top cover off of the device.

    • It is easier to pry off the cover from the back side just above the HDMI ports.

  4. Disassembling Optoma HD20 Cover: шаг 4, изображение 1 из 1
    • When removing the cover, be cautious of the ribbon connecting the top buttons to the main circuit board. The ribbon must be disconnected before proceeding.

    • Remove the ribbon by disconnecting it from the main circuit board.

    • Lift up the clip holding it down and pull the ribbon out.

Заключение

To reassemble your device, follow these instructions in reverse order.

8 участников успешно повторили данное руководство.

Trever

Участник с: 01/22/15

1 264 Репутация

Автор 6 руководств

Команда

Cal Poly, Team 21-23, Maness Winter 2015 Участник Cal Poly, Team 21-23, Maness Winter 2015

CPSU-MANESS-W15S21G23

4 членов

Автор 6 руководств

0 Комментариев

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 8

За последние 30 дней: 19

За всё время: 3,045