Введение

How to remove keyboard

Запчасти

Никакие детали не требуются.

Push open the latch and remove the battery. Push open the latch and remove the battery.
  • Push open the latch and remove the battery.

Добавить комментарий

Twist off the antenna. Pop off the transparent cylinder.
  • Twist off the antenna.

  • Pop off the transparent cylinder.

Добавить комментарий

Remove the five screws as shown.
  • Remove the five screws as shown.

Добавить комментарий

Carefully pry the back plate off.
  • Carefully pry the back plate off.

Добавить комментарий

Carefully detach golden screen connector. Carefully detach golden screen connector.
  • Carefully detach golden screen connector.

Добавить комментарий

Pop out the logic board with spudger. Caution: Do not touch with bare hands, use tweezers or wash hands before contact.
  • Pop out the logic board with spudger.

  • Caution: Do not touch with bare hands, use tweezers or wash hands before contact.

Добавить комментарий

Place the logic board on a clean tray. Place the logic board on a clean tray.
  • Place the logic board on a clean tray.

Добавить комментарий

Peel off the keyboard.
  • Peel off the keyboard.

Добавить комментарий

Заключение

To reassemble your device, follow these instructions in reverse order.

doconnor

Member since: 19.04.2010

25 Репутация

Автор 6 руководств

Команда

Cal Poly, Team 10-43, Garner Spring 2010 Member of Cal Poly, Team 10-43, Garner Spring 2010

CPSU-GARNER-S10S10G43

5 членов

Автор 6 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 0

За 7 дней: 0

За 30 дней: 0

За всё время: 1,056