Присоединяйся к сообществу ремонтников - Создай аккаунт

Введение

There are two LCD displays on this phone. When the phone is opened, the inside display has a cover with a piece of protective glass glued to it. Since this phone is designed to be water-resistant, breaking the factory seal made by the glue is not recommended as it may expose the inner electronics to moisture. This guide treats the glass and cover as a single part.

Выберете то, что вам нужно

1. Шаг 1 Inside Screen Cover
  There are 4 black screws that need to be removed on the top of the lid. A 1.5mm flathead screwdriver will work on the star shaped screw heads.
  
  Make note that two of the screws closest to the hinge are longer than the other two.
  Редактировать
  
  Спросите у FixBot
  
  Добавить комментарий
  
  1024
2. Шаг 2
  Remove the two side screws.
  
  When reassembling you may need to press the front and back of the lid together when inserting these side screws so that the holes align.
  Редактировать
  
  Спросите у FixBot
  
  Добавить комментарий
  
  1024
4. Шаг 3
  Use a plastic opening tool to remove the screen cover from the rest of the lid.
  Редактировать
  
  Спросите у FixBot
  
  Добавить комментарий
  
  1024
5. Шаг 4
  Your phone should look like the picture to the left.
  
  If reassembling from a previous step make sure the ribbon cable is properly situated before securing the front cover.
  Редактировать
  
  Спросите у FixBot
  
  Добавить комментарий
  
  1024