Введение

Use this guide to remove the battery cover and battery from the Game Boy.

Запчасти

Никакие детали не требуются.

  1. Remove the Phillips #00 screw on the side of the Game Boy closest to the directional pad. Once the screw has been loosened, lift the cover off the back of the device. Once the screw has been loosened, lift the cover off the back of the device.
    • Remove the Phillips #00 screw on the side of the Game Boy closest to the directional pad.

    • Once the screw has been loosened, lift the cover off the back of the device.

  2. Free shipping on all orders over 100 $ or containing a Pro Tech Toolkit!

    Посмотрите наш магазин
  3. Once the back cover is removed, you should see that the battery is connected to the device by two wires and a plastic connector. Gently grab the wires. Gently grab the wires.
    • Once the back cover is removed, you should see that the battery is connected to the device by two wires and a plastic connector.

    • Gently grab the wires.

  4. Carefully pull the wires until the connector comes out of the device. Be careful! Don't pull too hard, or you may rip the wires out from the connector.
    • Carefully pull the wires until the connector comes out of the device.

    • Be careful! Don't pull too hard, or you may rip the wires out from the connector.

    • When putting the battery back into the device, make sure the connector is put in exactly the way it came out.

Заключение

To reassemble your device, follow these instructions in reverse order.

5 участников успешно повторили данное руководство.

Jack

Участник с: 21.01.2010

252 Репутация

Автор 3 руководств

Команда

Cal Poly, Team 8-46, Regan Winter 2010 Member of Cal Poly, Team 8-46, Regan Winter 2010

CPSU-REGAN-W10S8G46

5 членов

Автор 15 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 3

За 7 дней: 16

За 30 дней: 60

За всё время: 11,478