Введение

If your power button is defective, replace the old one with the new power button.

Remove the barcode sticker at the bottom of the device.
  • Remove the barcode sticker at the bottom of the device.

Добавить комментарий

Remove two 8.4 mm T5 screws from the bottom of the device.
  • Remove two 8.4 mm T5 screws from the bottom of the device.

Добавить комментарий

  • Using a plastic opening tool, carefully pry open the device.

  • Open the device carefully, making sure not to damage the gold ribbon cable that connects the screen to the motherboard.

turn the unit around

Andrew Hayden - Ответить

Since there is no replacement speaker whats the point of this process?

greg - Ответить

Very detailed set of instructions! Does anyone known the thread size of the screws in step 2? 8.4 mm T5 screws: is the length of the screw (8.4 mm) ,and the head specification (T5- size of screw driver). I need the actual thread specification. I lost one of the screws and the other one 's head is stripped. I need to replace both screws.

Harold Schultz - Ответить

  • Remove the power button.

Where can I buy the button

milosvalek - Ответить

Заключение

To reassemble your device, follow these instructions in reverse order.

Timothy

Участник с: 26.01.2012

35 Репутация

Автор 3 руководств

Команда

Cal Poly, Team 9-3, Regan Winter 2012 Member of Cal Poly, Team 9-3, Regan Winter 2012

CPSU-REGAN-W12S9G3

5 членов

Автор 4 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 0

За 7 дней: 6

За 30 дней: 21

За всё время: 9,109