Перейти к основному содержанию

Fix Your Stuff

Right to Repair

Parts & Tools

Введение

Warning: Always be sure you are grounded whenever handling any of the circuit or logic boards.

  1. Remove the back panel by sliding it up.
    • Remove the back panel by sliding it up.

  2. Remove the battery.
    • Remove the battery.

  3. Remove the 4 torx-head screws in the corners of the phone using the T5 Torx Screwdriver.
    • Remove the 4 torx-head screws in the corners of the phone using the T5 Torx Screwdriver.

  4. Use the plastic opening tool to remove the front panel from the phone. Unplug the front button cable from the inside of the phone.
    • Use the plastic opening tool to remove the front panel from the phone.

    • Unplug the front button cable from the inside of the phone.

  5. Remove the 2 philips-head screws on the back of the front panel using the PH00 screwdriver.
    • Remove the 2 philips-head screws on the back of the front panel using the PH00 screwdriver.

  6. Remove the small circuit board by gently pushing on the center button on the front of the phone.
    • Remove the small circuit board by gently pushing on the center button on the front of the phone.

  7. Remove the buttons by pushing on them from the front side of the phone.
    • Remove the buttons by pushing on them from the front side of the phone.

Заключение

To reassemble your device, follow these instructions in reverse order.

Еще один человек закончил это руководство.

Andrew Brooks

Участник с: 13.04.2011

101 Репутация

Автор 2 руководств

Команда

Cal Poly, Team 15-12, Regan Spring 2011 Участник Cal Poly, Team 15-12, Regan Spring 2011

CPSU-REGAN-S11S15G12

4 членов

Автор 5 руководств

Один комментарий

I need the keypad flex cable. Where to buy. Please guide smahapatra2012@gmail.com

subhas mahapatra - Ответить

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 1

За последние 30 дней: 1

За всё время: 2,782