Запчасти

Никакие детали не требуются.

Identify the black air concentrating nozzle.
  • Identify the black air concentrating nozzle.

Добавить комментарий

Remove the black air concentrating nozzle by gently twisting and pulling the nozzle.
  • Remove the black air concentrating nozzle by gently twisting and pulling the nozzle.

Добавить комментарий

  • Using a screwdriver, remove the screw located underneath the air concentrating nozzle. This screw attaches the hair dryer body to the hair dryer grating.

  • The purpose of this guide is to demonstrate the repair steps for a generic hair dryer. We do not specify screw sizes because screw sizes can differ between hair dryers. For most hair dryers, use a Phillips #1 Screwdriver. For hair dryers with smaller screws, consider using a Phillips #00 Screwdriver.

Добавить комментарий

  • Detach the hair dryer grating from the body by gently twisting the grating from side to side.

Добавить комментарий

  • Separate the hair dryer grating into the three pieces seen in the image.

Добавить комментарий

Заключение

To reassemble your device, follow these instructions in reverse order.

Mitch

Участник с: 04.10.2012

28 Репутация

Автор 5 руководств

Команда

Cal Poly, Team 24-29, Regan Fall 2012 Member of Cal Poly, Team 24-29, Regan Fall 2012

CPSU-REGAN-F12S24G29

5 членов

Автор 6 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 1

За 7 дней: 6

За 30 дней: 14

За всё время: 1,427