Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

  1. Flip the ThinkPad over so that it is upside down. Slide the highlighted tab to the left.
    • Flip the ThinkPad over so that it is upside down.

    • Slide the highlighted tab to the left.

    • With your finger on the tab, remove the battery by lifting it upwards away from the laptop.

  2. Remove the two 5.3mm cover screws. Gently lift the cover containing the RAM.
    • Remove the two 5.3mm cover screws.

    • Gently lift the cover containing the RAM.

  3. Manta Driver Kit

    112 bits for every fix.

    Upgrade Your Toolbox

    Manta Driver Kit

    Upgrade Your Toolbox
  4. Remove RAM module by pressing the two metal pieces outward with your thumbs.
    • Remove RAM module by pressing the two metal pieces outward with your thumbs.

  5. Lift the RAM module up and out, away from the yellow connector. Place the RAM module away from any magnets or static electricity prone areas.
    • Lift the RAM module up and out, away from the yellow connector.

    • Place the RAM module away from any magnets or static electricity prone areas.

Заключение

To reassemble your device, follow these instructions in reverse order.

Еще один человек закончил это руководство.

Jessica

Участник с: 06.10.2010

162 Репутация

Автор 7 руководств

Команда

Cal Poly, Team 4-44, Amido Fall 2010 Участник Cal Poly, Team 4-44, Amido Fall 2010

CPSU-AMIDO-F10S4G44

4 членов

Автор 26 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 3

За всё время: 2,817