Перейти к основному содержанию
Присоединяйся к сообществу ремонтников - Создай аккаунт

Insert Filament (Before Printing)

  1. Insert Filament (Before Printing), Heating the spout: шаг 1, изображение 1 из 2 Insert Filament (Before Printing), Heating the spout: шаг 1, изображение 2 из 2
    • Select "Quick Setup" from the home menu.

    • Select the "Pre-heat" option PLA

    Спросите у FixBot

    Добавить комментарий

  2. Insert Filament (Before Printing), Inserting the filament: шаг 2, изображение 1 из 2 Insert Filament (Before Printing), Inserting the filament: шаг 2, изображение 2 из 2
    • Press the ear of the extruder with one hand and insert the filament into the hole as shown in the pictures.

    Спросите у FixBot

    Добавить комментарий

  3. Insert Filament (Before Printing), Inserting the filament: шаг 3, изображение 1 из 1
    • Push the filament through the PTFE tube until it exits through the nozzle to make sure it has been inserted all the way.

    Спросите у FixBot

    Добавить комментарий

Заключение

Ready! Your Filament is inserted!

Отменить: Я не выполнил это руководство.

Особая благодарность этим переводчикам:

pt en

100%

irlanda помогает нам починить мир! Хотите внести свой вклад?
Начните переводить ›

Mousta Impressoras 3D

Участник с: 03/17/17

691 Репутация

Автор 5 руководств

0 Комментарии к руководству

Добавить комментарий

Статистика просмотров:

За последние 24 часов: 1

За последние 7 дней: 13

За последние 30 дней: 120

За всё время: 544