Перейти к основному содержанию

Internal Battery Circuit Connector

Выберете то, что вам нужно

  1. Internal Battery Circuit Connector, Batteries: шаг 1, изображение 1 из 2 Internal Battery Circuit Connector, Batteries: шаг 1, изображение 2 из 2
    • Flip the camera over so the bottom of the camera is facing you.

    • Turn the mode dial to the OFF position.

  2. Internal Battery Circuit Connector: шаг 3, изображение 1 из 2 Internal Battery Circuit Connector: шаг 3, изображение 2 из 2
    • Slide the bottom cover in the direction of the arrow to open it.

  3. Internal Battery Circuit Connector: шаг 4, изображение 1 из 1
    • Pull out the batteries.

  4. Internal Battery Circuit Connector, Internal Battery Circuit Connector: шаг 5, изображение 1 из 1
    • Remove the three screws from the circuit connector.

  5. Internal Battery Circuit Connector: шаг 6, изображение 1 из 1
    • Remove the connector from the battery holder door.

Заключение

To reassemble your device, follow these instructions in reverse order.

Еще один человек закончил это руководство.

Nick Oleskowicz

Участник с: 04/03/12

287 Репутация

Автор 3 руководств

Команда

Cal Poly, Team 15-13, Forte Spring 2012 Участник Cal Poly, Team 15-13, Forte Spring 2012

CPSU-FORTE-S12S15G13

5 членов

Автор 10 руководств

0 Комментариев

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 1

За последние 30 дней: 12

За всё время: 1,706