Введение

Use this guide to replace the front cover.

Запчасти

Никакие детали не требуются.

  1. Have the camera facing up and the flash closest to you.
    • Have the camera facing up and the flash closest to you.

    • Unscrew the two 6.2 mm Phillips screws on the top half of the camera.

    Добавить комментарий

  2. Spread Fixmas Cheer
    Получите $12 за покупку от $50 и выше с промокодом FIXMAS12
    Spread Fixmas Cheer
    Получите $12 за покупку от $50 и выше с промокодом FIXMAS12
  3. Flip camera to other side-with flash farthest from you.
    • Flip camera to other side-with flash farthest from you.

    • Unscrew top two 6.2mm Phillips screws on this side.

    Добавить комментарий

    • Turn the camera so the bottom is facing up with the front facing away.

    • Unscrew the 6.2mm Phillips screw on the top right.

    • The front cover is now unscrewed and should be lifted up evenly and removed.

    Добавить комментарий

Заключение

To reassemble your device, follow these instructions in reverse order.

Michelle

Участник с: 04.04.2011

86 Репутация

Автор 5 руководств

Команда

Cal Poly, Team 25-28, Garner Spring 2011 Member of Cal Poly, Team 25-28, Garner Spring 2011

CPSU-GARNER-S11S25G28

4 членов

Автор 6 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 0

За 7 дней: 2

За 30 дней: 4

За всё время: 1,686