Введение

USe this guide to replace the tripod socket.

Запчасти

Никакие детали не требуются.

Carefully unscrew the four (4) screws on the bottom of the camera. Make sure you don't miss the one that's actually in the tripod socket hole.
  • Carefully unscrew the four (4) screws on the bottom of the camera.

  • Make sure you don't miss the one that's actually in the tripod socket hole.

Добавить комментарий

Open the back door on the camera by pushing down on the door latch.
  • Open the back door on the camera by pushing down on the door latch.

Добавить комментарий

Apply pressure to the bottom plate and it will pop off.
  • Apply pressure to the bottom plate and it will pop off.

  • From here, you can replace the bottom plate, or continue on to further steps.

Добавить комментарий

Заключение

To reassemble your device, follow these instructions in reverse order.

Zachary

Member since: 12.04.2011

31 Репутация

Автор 2 руководств

Команда

Cal Poly, Team 18-19, Garner Spring 2011 Member of Cal Poly, Team 18-19, Garner Spring 2011

CPSU-GARNER-S11S18G19

4 членов

Автор 5 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 1

За 7 дней: 1

За 30 дней: 2

За всё время: 2,096