Введение

You will need a screw driver and prying tool for this guide. Some of the parts are hard to remove at first and have some force applied to them.

Запчасти

Никакие детали не требуются.

  1. The battery compartment cover is located on the top of the mouse. The seam running horizontally across the mouse is the top of the cover.
    • The battery compartment cover is located on the top of the mouse. The seam running horizontally across the mouse is the top of the cover.

    • There is a button to pop off the cover. It is located on the bottom of the mouse. you may need to press hard on this button to pop the cover.

    • If the button does not work, you will need to pry off the cover. You can use your fingernails or a prying tool in order to do this, as seen in the third image.

    Добавить комментарий

  2. Remember to insert the new battery in the same orientation as the old one. The positive (plus) end should be facing away from the buttons.
    • Remember to insert the new battery in the same orientation as the old one. The positive (plus) end should be facing away from the buttons.

    Добавить комментарий

    • The pads on the underside of the mouse hide the screws. Remove these first. You may need to use your fingernails or a prying tool.

    • There will be two 0.5mm phillips head screws. Both will be underneath the bottom two pads.

    Добавить комментарий

    • Pry the top cover off. You may need to use a pry tool to help.

    Добавить комментарий

    • Use your fingernail to carefully remove the two skid stickers from the fat (non-button) end of the bottom of the mouse to reveal two Philips head screws. Remove these, then unclip the bottom cover. Don't get the sticky dusty. Now remove buttons; they're both attached by one 0.5mm Phillips head screw. It is located in the center of the top cover.

    Добавить комментарий

    • The button are now only attached by a small overhang near the front. You will need to use the pry tool to push the button plate off of this overhang as shown.

    • The button plate should be able to be completely removed at this point.

    Добавить комментарий

Заключение

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Hannah Pate

Участник с: 30.01.2015

1 408 Репутация

Автор 6 руководств

Команда

USF Tampa, Team 1-1, Watkins Winter 2015 Member of USF Tampa, Team 1-1, Watkins Winter 2015

USFT-WATKINS-W15S1G1

4 членов

Автор 12 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 1

За 7 дней: 15

За 30 дней: 51

За всё время: 3,323