Перейти к основному содержанию

Введение

After removing the top cover you will be able to replace the mouse buttons.

Запчасти

No parts specified.

  1. Hold the mouse so that the bottom is facing up.
    • Hold the mouse so that the bottom is facing up.

    • Locate the #1 screw towards the bottom half of the mouse.

    • Take the 4.76 mm Phillips screwdriver and unscrew the #1 screw.

  2. Place the mouse so that the bottom is resting against a hard surface . Gently lift the top cover of the mouse and remove.
    • Place the mouse so that the bottom is resting against a hard surface .

    • Gently lift the top cover of the mouse and remove.

  3. Locate the two tabs that are protruding from the button assembly. Be careful not to break either of the two tabs by squeezing too hard.
    • Locate the two tabs that are protruding from the button assembly.

    • Be careful not to break either of the two tabs by squeezing too hard.

    • Now pinch the tabs together to free the buttons.

  4. Free the button assembly from the top cover by bringing the button section down. Then sliding the button assembly out from the top cover through the opening.
    • Free the button assembly from the top cover by bringing the button section down.

    • Then sliding the button assembly out from the top cover through the opening.

    • When fully parted the top cover and the button assembly should look like this.

Заключение

To reassemble your device, follow these instructions in reverse order.

Maximilian Betkowski

Участник с: 11.01.2013

175 Репутация

Автор 4 руководств

Команда

Cal Poly, Team 5-14, Forte Winter 2013 Member of Cal Poly, Team 5-14, Forte Winter 2013

CPSU-FORTE-W13S5G14

5 членов

Автор 7 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 0

За 7 дней: 5

За 30 дней: 12

За всё время: 1,608