Lytro Camera First Generation Repair

Pull the top off using your hands or the plastic opening tool.

Unscrew the four screws(7.1cm) seen after taking the top off.

Pry that silver piece off that you just took the four screws out of.

Take the camera out of the red part. You should have 3 piece not including the top.

Take the 3 screws(.5) out of the middle piece.

After taking that off you will see the camera lens.

Pry the piece hanging off with tweezers.

Now you can unscrew the three screws(.5) seen releasing the camera lense from the camera.

After that you can pull it off with the tweezers.

Now that you have it off you can replace it and reverse the steps getting it back together.