Введение

Remove the bottom cover to access components inside your Mac mini Mid 2011.

Инструменты

No tools required.

  1. Place your thumbs in the depressions cut into the bottom cover. Rotate the bottom cover counter-clockwise until the white dot painted on the bottom cover is aligned with the ring inscribed on the outer case.
    • Place your thumbs in the depressions cut into the bottom cover.

    • Rotate the bottom cover counter-clockwise until the white dot painted on the bottom cover is aligned with the ring inscribed on the outer case.

    • You do not need to apply much downward pressure while turning.

  2. Free shipping on all orders over 100 $ or containing a Pro Tech Toolkit!

    Посмотрите наш магазин
  3. Tilt the mini enough to allow the bottom cover to fall away from the outer case.
    • Tilt the mini enough to allow the bottom cover to fall away from the outer case.

    • Remove the bottom cover and set it aside.

Заключение

To reassemble your device, follow these instructions in reverse order.

15 участников успешно повторили данное руководство.

Andrew Optimus Goldberg

Участник с: 17.10.2009

406 157 Репутация

Автор 412 руководств

Команда

iFixit Member of iFixit

Community

100 членов

Автор 7 963 руководств

Комментариев: 0

Просмотр статистики:

За 24 часа: 4

За 7 дней: 20

За 30 дней: 68

За всё время: 8,340