Введение
The rechargeable battery used in this device is one of the components most likely to fail. Fortunately the replacement process is simple and straightforward. Follow this guide for a pain-free battery replacement experience.
Выберете то, что вам нужно
-
-
Place the unit face down as shown in the picture, exposing the battery cover.
-
Remove the two 4.0mm long screws holding the cover on using a T10 driver.
-
-
To reassemble your device, follow these instructions in reverse order.
Отменить: Я не выполнил это руководство.
2 человек успешно провели ремонт по этому руководству.
Команда
Oregon Institute of Technology, Team S1-G3, Lancaster Winter 2019 Участник Oregon Institute of Technology, Team S1-G3, Lancaster Winter 2019
OIT-LANCASTER-W19S1G3
4 членов
Автор 10 руководств
4 Комментарии к руководству
Where can I get a replacement battery? The unhelpful guys at Marshall say it’s not a spare part that can be soruced/replaced. Any suggestions?
Guy
My new bought killburn. Doesnt charge. Any idea whats the problem of this?
This one should work: https://vintrons.com/products/marshall-t...
Hi, does anybody know how to recharge the battery external, because something on the platina fried (LL10) component, and it want charge through the killburn, but works fine with battery. Thank you
