Введение
After removing the covering of the flash arm and it's components, remove the metal spring from it's hinge and replace it with a new one.
Выберете то, что вам нужно
-
-
Remove the two 2.5mm x 4mm Philips screws located directly under the flash.
-
Pop off the covering of the flash to reveal the flash arm spring.
-
-
-
-
Lift the flash arm spring using the plastic spudger and unhinge the spring to remove it.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Отменить: Я не выполнил это руководство.
6 участников успешно повторили данное руководство.
