Перейти к основному содержанию

Nook Tablet Back Cover Replacement

Выберете то, что вам нужно

  1. Nook Tablet Back Cover Replacement, Back Cover: шаг 1, изображение 1 из 1
    • Flip the Nook over.

  2. Nook Tablet Back Cover Replacement: шаг 2, изображение 1 из 2 Nook Tablet Back Cover Replacement: шаг 2, изображение 2 из 2
    • Lift the flap that reads "Nook" to reveal the tape that is underneath. Remove the memory card if one is present.

    • Remove the tape covering the round holes to reveal two T5 Torx screws.

    • Remove the two T5 Torx screws securing the back cover.

  3. Nook Tablet Back Cover Replacement: шаг 3, изображение 1 из 2 Nook Tablet Back Cover Replacement: шаг 3, изображение 2 из 2
    • Insert the flat end of a spudger between the front panel and the rear assembly.

    • Though these photos show a screwdriver, use a spudger or plastic opening tool in order to prevent damage to the device.

    • Use a spudger to lift the the back panel from the rest of the Nook.

  4. Nook Tablet Back Cover Replacement: шаг 4, изображение 1 из 2 Nook Tablet Back Cover Replacement: шаг 4, изображение 2 из 2
    • Slide the spudger around the edges of the Nook to loosen the back panel.

  5. Nook Tablet Back Cover Replacement: шаг 5, изображение 1 из 1
    • Pull the back panel off the Nook.

Заключение

To reassemble your device, line up the piece that was removed with how it was on before and then just firmly press down till it snaps into place.

5 участников успешно повторили данное руководство.

Jacob Metzinger

Участник с: 09/25/12

89 Репутация

Автор 2 руководств

Команда

Cal Poly, Team 1-4, Propen Fall 2012 Участник Cal Poly, Team 1-4, Propen Fall 2012

CPSU-PROPEN-F12S1G4

4 членов

Автор 14 руководств

0 Комментариев

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 1

За последние 30 дней: 16

За всё время: 5,858