Введение

Splitting the case of the Mifi 2200 is necessary to be able access the internal parts. This is how to go about that.

Запчасти

Никакие детали не требуются.

  1. Remove the rear cover by pressing down on the cover and pulling it away from the device.
    • Remove the rear cover by pressing down on the cover and pulling it away from the device.

    Добавить комментарий

  2. Place your finger on the back of the battery located near the edge of the device.
    • Place your finger on the back of the battery located near the edge of the device.

    • Push your finger into the battery and lift up to pop the battery out of the device.

    Добавить комментарий

  3. GIVE TOOLS. FIX FOREVER.

    GIVE TOOLS.

    FIX FOREVER.

    Spread the Fixmas cheer.

    GIVE TOOLS. FIX FOREVER.

    Spread the Fixmas cheer.

    • Using a metal spudger, pry open the device around the seam between the front and back cover.

    • It may be difficult to split apart, so use force with caution.

    • It may seem like you are breaking the device, but you will only be breaking the adhesive lining that keeps the device sealed.

    Добавить комментарий

    • Once the seal has been broken all the way around, open the cases using your hands.

    Добавить комментарий

Заключение

To reassemble your device, follow these instructions in reverse order.

2 участников успешно повторили данное руководство.

Justin Russo

Участник с: 15.04.2012

196 Репутация

Автор 3 руководств

Команда

Cal Poly, Team 7-36, Maness Spring 2012 Member of Cal Poly, Team 7-36, Maness Spring 2012

CPSU-MANESS-S12S7G36

5 членов

Автор 5 руководств

Один комментарий

If case gets damaged, is there a place to but the case

Snehraj Merchant - Ответить

Добавить комментарий

Просмотр статистики:

За 24 часа: 0

За 7 дней: 0

За 30 дней: 0

За всё время: 1,368