Введение

If the device is not tracking motion properly this could be due to a broken camera motherboard. Common causes for motherboard failure include being exposed to static shock, overheating, or component failure.

Запчасти

Никакие детали не требуются.

Remove the filter from the camera as shown.
  • Remove the filter from the camera as shown.

Добавить комментарий

Remove the cover plate from the front face of the camera using the iFixit Opening Pick.
  • Remove the cover plate from the front face of the camera using the iFixit Opening Pick.

Добавить комментарий

  • Remove the two 3/16" J #000 screws.

  • Lift the back plate off.

Добавить комментарий

  • Gently tug on the wires to free them from the motherboard.

Добавить комментарий

  • Remove the four 3/16" Phillips #000 from the four corners of the motherboard.

  • Remove the two 1/4" Phillips #0 screws shown to release the motherboard from the enclosure.

Добавить комментарий

Заключение

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Anthony Vasquez

Участник с: 22.01.2015

162 Репутация

1 Guide authored

Команда

Cal Poly, Team 18-5, Maness Winter 2015 Member of Cal Poly, Team 18-5, Maness Winter 2015

CPSU-MANESS-W15S18G5

4 членов

Автор 6 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 0

За 7 дней: 0

За 30 дней: 1

За всё время: 466