Введение

Two RAM slots allow up to 1 GB of PC133 RAM.

Инструменты

No tools required.

  1. Remove the battery.
    • Remove the battery.

    • Turn the keyboard locking screw so that it is parallel to the space bar.

    • Pull the keyboard release tabs toward you and lift up on the keyboard until it pops free.

  2. Rest the keyboard face down on the trackpad area.
    • Rest the keyboard face down on the trackpad area.

    • Disconnect the keyboard connector from the logic board.

  3. Free shipping on all orders over 100 $ or containing a Pro Tech Toolkit!

    Посмотрите наш магазин
  4. Your laptop should look approximately like this.
    • Your laptop should look approximately like this.

  5. Release the tabs on each side of the RAM chip at the same time. These tabs lock the chip in place and releasing them will cause the chip to ÒpopÓ up.
    • Release the tabs on each side of the RAM chip at the same time. These tabs lock the chip in place and releasing them will cause the chip to ÒpopÓ up.

    • Pull the RAM chip out.

    • Repeat this process if a second RAM chip is installed.

Заключение

To reassemble your device, follow these instructions in reverse order.

4 участников успешно повторили данное руководство.

Прикрепленные документы

iRobot

Участник с: 24.09.2009

1 Репутация

Автор 623 руководств

Комментариев: 0

Просмотр статистики:

За 24 часа: 0

За 7 дней: 3

За 30 дней: 6

За всё время: 6,611