Введение
In this replacement guide you will learn the steps to replace the power button on your Protocol DURA VR drone remote.
Выберете то, что вам нужно
-
-
Remove the four 0.8mm Phillips #0 screws from the back casing of the remote.
-
-
-
-
Move the motherboard up to allow room for the power bottom to become visible and loose.
-
-
-
Place the remote face up. Then pick up the broken power button and replace with a new button.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Отменить: Я не выполнил это руководство.
Еще один человек закончил это руководство.