Введение
This guide is for replacing the Protocol Dronium Two. Included in your box should be four replacement blades. Do this repair in a clean and well lit place because the rotor blade screw is very small and easy to lose.
Выберете то, что вам нужно
-
-
-
Turn off the drone by pushing the selector switch to the left.
Спросите у FixBot
-
-
-
-
Using the Phillips screwdriver included with the drone, carefully remove the 4.02 mm rotor blade screw.
-
Once the screw is removed, remove the rotor blade by lifting the blade straight off of the drone
-
-
To reassemble your device, follow these instructions in reverse order.
Отменить: Я не выполнил это руководство.
Еще один человек закончил это руководство.
Команда
Arkansas State University, Team 1-2, Chamberlain Spring 2017 Участник Arkansas State University, Team 1-2, Chamberlain Spring 2017
ARSU-CHAMBERLAIN-S17S1G2
4 членов
Автор 5 руководств
