Введение
This guide will lead you through the steps necessary to access the screen's components as well as how to assure it is properly connected.
Выберете то, что вам нужно
-
-
-
-
Check that the single input plug from the logic board to the screen (reverse side) is completely pushed in by pressing it firmly into the socket.
-
Also check that the 2 output plugs from the screen to the logic board are completely pushed in by pressing them firmly into the highlighted sockets.
-
Спросите у FixBot
To reassemble your device, follow these instructions in reverse order.
Отменить: Я не выполнил это руководство.
Еще один человек закончил это руководство.
Команда
Cal Poly, Team 7-50, Forte Fall 2012 Участник Cal Poly, Team 7-50, Forte Fall 2012
CPSU-FORTE-F12S7G50
5 членов
Автор 56 руководств
