Введение

This guide will systematically explain how to replace the shaving blade of the Remington MB4040. A rough or irritating shave is most likely caused by a dull blade. The replacement of this dull blade will allow for a more comfortable shave.

Запчасти

Никакие детали не требуются.

  1. Press the black button to release the blade from its locked position.
    • Press the black button to release the blade from its locked position.

    Добавить комментарий

  2. Remove the two 8.0 mm PH00 Phillips head screws from the blade assembly.
    • Remove the two 8.0 mm PH00 Phillips head screws from the blade assembly.

    • Detach the silver blade from the blade assembly and replace with the new blade.

    The entre assemble comes apart once you remove the blade. I cannot figure out how to get it back together and in the housing. Any suggestions?

    sublime - Ответить

    I have the same problem, I cannot figure out how the spring is attached/held to the blade.

    Peter J. Ford - Ответить

Заключение

To reassemble your device, follow these instructions in reverse order.

Cameron Carnahan

Участник с: 20.01.2015

697 Репутация

Автор 6 руководств

Команда

USF Tampa, Team 1-5, Blackwell Winter 2015 Member of USF Tampa, Team 1-5, Blackwell Winter 2015

USFT-BLACKWELL-W15S1G5

3 членов

Автор 6 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 2

За 7 дней: 25

За 30 дней: 139

За всё время: 4,985