Введение

Follow these steps to replace the fuser unit by taking off the back cover of your Samsung CLP-300.

  1. Turn the printer off and wait a few minutes for it to cool. Turn printer around so that you are looking at the rear panel.
    • Turn the printer off and wait a few minutes for it to cool.

    • Turn printer around so that you are looking at the rear panel.

  2. Open back of printer by pushing down handle.
    • Open back of printer by pushing down handle.

  3. Free shipping on all orders over 100 $ or containing a Pro Tech Toolkit!

    Посмотрите наш магазин
  4. Remove the four screws that attach the fuser unit to the printer. Remove the four screws that attach the fuser unit to the printer.
    • Remove the four screws that attach the fuser unit to the printer.

  5. Slide fuser unit out of the printer. Remove packaging from new fuser unit.
    • Slide fuser unit out of the printer.

    • Remove packaging from new fuser unit.

    • Insert new fuser unit.

Заключение

To reassemble your device, follow these instructions in reverse order.

Heather Howard

Участник с: 15.10.2014

466 Репутация

Автор 4 руководств

Команда

University of Maine, Team 1-1, Diaz Fall 2014 Member of University of Maine, Team 1-1, Diaz Fall 2014

UMAINE-DIAZ-F14S1G1

3 членов

Автор 4 руководств

Комментариев: 0

Просмотр статистики:

За 24 часа: 9

За 7 дней: 27

За 30 дней: 160

За всё время: 5,786