Введение

Follow these easy steps to replace the imaging unit in your Samsung CLP-300.

Turn the printer off and wait a few minutes for it to cool.
  • Turn the printer off and wait a few minutes for it to cool.

Добавить комментарий

Open the front cover Open the front cover
  • Open the front cover

Добавить комментарий

Remove waste toner container from the printer.
  • Remove waste toner container from the printer.

Добавить комментарий

Pull the imaging unit out of the printer using bottom handle. Use green handle on top of imaging unit to steady unit as you pull it out. Holding the top and bottom handles on the new imaging unit, slide the unit in the printer until you hear a “click.”
  • Pull the imaging unit out of the printer using bottom handle.

  • Use green handle on top of imaging unit to steady unit as you pull it out.

  • Holding the top and bottom handles on the new imaging unit, slide the unit in the printer until you hear a “click.”

  • Remove new imaging unit from its packaging making sure to remove protective paper and devices from unit

  • Do not expose new imaging unit to light for more than a few minutes. Covering unit with a piece of paper is sufficient protection while you complete repair.

  • If you hear a crackling sound once the printer turns on the imaging unit is not installed correctly. Take out and reinsert the unit.

Добавить комментарий

Заключение

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Heather Howard

Member since: 15.10.2014

439 Репутация

Автор 4 руководств

Команда

University of Maine, Team 1-1, Diaz Fall 2014 Member of University of Maine, Team 1-1, Diaz Fall 2014

UMAINE-DIAZ-F14S1G1

3 членов

Автор 4 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 15

За 7 дней: 77

За 30 дней: 263

За всё время: 3,681