Введение

If your device's touchscreen is unresponsive or cracked, replace it with this guide. This will require you to replace the whole front screen assembly, as you can't just replace the screen itself.

Запчасти

Никакие детали не требуются.

  1. Place the watch screen-down so that its back cover is showing.
    • Place the watch screen-down so that its back cover is showing.

  2. Remove the four 4.2mm screws with a Y00 screwdriver.
    • Remove the four 4.2mm screws with a Y00 screwdriver.

    • Wedge the metal spudger in between the back cover and the frame along the seam.

    • Use force to pry the back cover away from the main watch frame.

    • This step requires a lot of force. You can use a Jimmy in place of a metal spudger to make the process easier.

    • This step will ruin the water-proof seal.

    • Detach the three connectors on the motherboard using your fingernail.

    • The connectors are easy to pop off. Minimal force is necessary.

    • Separate the motherboard and front screen assembly using a spudger.

Заключение

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Jimmy Algeo

Участник с: 08.10.2018

187 Репутация

Автор 2 руководств

Команда

Cal Poly, Team S15-G2, White Fall 2018 Member of Cal Poly, Team S15-G2, White Fall 2018

CPSU-WHITE-F18S15G2

4 членов

Автор 7 руководств

Комментариев: 0

Просмотр статистики:

За 24 часа: 4

За 7 дней: 39

За 30 дней: 163

За всё время: 266