Введение

This guide does not require any prerequisite steps. Flip open the phone and begin the guide.

Запчасти

Никакие детали не требуются.

With the flat end of  a spudger, remove the plastic covers located on the corners of the display near the hinge and above the screen, revealing four screws underneath. With the flat end of  a spudger, remove the plastic covers located on the corners of the display near the hinge and above the screen, revealing four screws underneath.
  • With the flat end of a spudger, remove the plastic covers located on the corners of the display near the hinge and above the screen, revealing four screws underneath.

Добавить комментарий

Remove the 4.4mm screw in each corner using the Tri-wing Y0 screwdriver. Remove the 4.4mm screw in each corner using the Tri-wing Y0 screwdriver.
  • Remove the 4.4mm screw in each corner using the Tri-wing Y0 screwdriver.

Добавить комментарий

Carefully pry the screen protector off the phone using the flat end of the spudger. This will require a bit of force as the back of the screen protector is lined with an adhesive material.
  • Carefully pry the screen protector off the phone using the flat end of the spudger.

    • This will require a bit of force as the back of the screen protector is lined with an adhesive material.

  • Once free from the adhesive, pull the screen protector away from the phone.

Добавить комментарий

Заключение

To reassemble your device, follow these instructions in reverse order.

StephenYH

Участник с: 11.03.2013

20 Репутация

Автор 6 руководств

Команда

Clemson, Team 12-1, Benson Spring 2013 Member of Clemson, Team 12-1, Benson Spring 2013

CLEM-BENSON-S13S12G1

4 членов

Автор 20 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 0

За 7 дней: 0

За 30 дней: 0

За всё время: 202