Введение

Is your motor running but the drill is not turning? Replace those gears to start providing torque to your drill bit.

Запчасти

Никакие детали не требуются.

On the front of the drill, remove the three 2" flathead screws connecting the front housing to the rear housing.
  • On the front of the drill, remove the three 2" flathead screws connecting the front housing to the rear housing.

Добавить комментарий

Pull the front housing apart from the rear. The motor and gears might fall out when you are pulling it apart.
  • Pull the front housing apart from the rear.

  • The motor and gears might fall out when you are pulling it apart.

Добавить комментарий

Remove gear from the divider and add the new gear. Remove gear from the divider and add the new gear.
  • Remove gear from the divider and add the new gear.

Добавить комментарий

Заключение

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Matt

Участник с: 10.10.2010

365 Репутация

Автор 7 руководств

Команда

Cal Poly, Team 5-17, Maness Fall 2010 Member of Cal Poly, Team 5-17, Maness Fall 2010

CPSU-MANESS-F10S5G17

3 членов

Автор 7 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 0

За 7 дней: 0

За 30 дней: 13

За всё время: 1,772