Введение
Follow this guide to remove the handle of a Tara pump for replacement or repair.
-
-
-
Use a Tara tool to loosen the jam nuts on either side of the pump.
Спросите у FixBot
-
-
-
Pull the plastic bushing and handle straight up out of the pump.
-
-
-
-
Lift up the handle and riser main until the joint between the two is at a comfortable height to work on.
-
-
-
Loosen the jam nut beneath the pump handle using the Tara tool.
-
-
-
Lift and remove the handle from the pump. Store the handle in a sanitary place to prevent contamination.
-
-
Заключение
To reassemble your device, follow these instructions in reverse order.
