Введение
We are going to teach you how to disassemble your Master Prep.
Выберете то, что вам нужно
-
-
-
Remove the two highlighted screws with a Phillips #2 Screw Driver
-
Gently pull off the top.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Отменить: Я не выполнил это руководство.
Еще один человек закончил это руководство.
Один комментарий
My unit has something other than Phillips screws holding the top together. It appears to be an Allen head, not a torx, closest fit was a 2mm Allen wrench but that was still too small. What head could this be?