Перейти к основному содержанию
Помощь

iPhone 16 Back Glass Installation

Редактирование шага 1 —

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 8 руководства, которые включают этот шаг.

Тип шага:

Перетащите чтобы изменить порядок

Be careful not to damage any of the spring contacts as you clean the frame.

This is a good point to test your repair before sealing up your phone. Connect the battery and back glass, power on your phone, and make sure it works as expected. Power it back down, disconnect the battery and back glass, and continue reassembly.

The adhesive remaining on your phone is difficult to remove and leaves residue. If you have trouble removing the adhesive, apply some heat using a hair dryer or heat gun.

Use the pointed end of a spudger to press and roll the adhesive until you can grip it with a pair of tweezers.

Ваш вклад лицензируется под свободной лицензией Creative Commons .