Перейти к основному содержанию
Помощь

iPhone 16 Back Glass Installation

Редактирование шага 11 —

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 8 руководства, которые включают этот шаг.

Тип шага:

Перетащите чтобы изменить порядок

Once the top liner is removed, there should be three narrow liners on top of the adhesive with pull tabs near the bottom edge.

Your pull tabs may be in different positions.

If you don't see these pull tabs, you may have accidentally removed the thin liners in the previous step. If the adhesive is clean and properly aligned, you may proceed, just be careful not to touch anything to the exposed adhesive until you are ready to install the back glass.

Ваш вклад лицензируется под свободной лицензией Creative Commons .